Paired at the factory · No wiring
Hear every visitor, anywhere in the house
A wireless doorbell that is ready the moment you unpack it. Plug the receiver into any outlet, stick the button by the door, and you are done in about a minute. No wiring, no electrician, no app.
- 1 minSetup time
- 1,300 ftOpen-air range
- 58Melodies
- IP55Weather resistant
01 — Out of the box
Already paired before it ships
The button and receiver arrive matched to each other, so there is nothing to configure. Plug the receiver in, mount the button with the included adhesive or screws, and press it once to confirm.
- No wiring and no electrician needed
- No hub, Wi-Fi, or phone setup
- Adhesive mounting keeps rented doorframes intact
02 — Coverage
Reaches the back bedroom and the garage
An FM signal with one-to-one pairing gives it strong resistance to interference, so your chime will not be set off by a neighbour's doorbell. Range reaches up to 1,300 ft in open line-of-sight conditions. Walls, metal doors, and floors shorten that, which is why extra receivers help in larger homes.
Real-world range depends on how many walls the signal has to pass through.
03 — Sound
58 melodies, 5 volume levels
Pick a short ping for daytime deliveries or a longer tune you will hear over a running tap. Five volume steps let you set it loud for the workshop and quiet for a nursery.
- Short chimes and longer melodies, 58 in total
- Volume adjusts on the receiver, no tools needed
- Give the front and back door different tunes so you know where to go
04 — Build
Built for the outside of the door
The button is moulded from flame-resistant ABS and carries IP55 protection against dust and water spray, with an operating range of -4°F to 140°F (-20°C to 60°C). It handles rain, snow, and summer sun on an exposed porch.
05 — Power
Years between battery changes
The button draws no power until someone presses it, so a single battery typically lasts 1 to 3 years depending on how often it is used. The receiver runs from the wall outlet on an optimised low-draw circuit, so there are no batteries to track indoors.
06 — Fits your layout
Add buttons and receivers as you need them
Every receiver in a kit rings together, so you can cover a whole floor plan. Choose the combination that matches your home.
-
1 button + 1 receiver
Apartments and small flats where one chime carries.
-
1 button + 2 receivers
One entrance, two floors. Put one upstairs and one in the kitchen.
-
2 buttons + 3 receivers
Front and back door, with chimes in the main rooms and the garage.
Where people put it
- Front and back doors of a two-storey home
- Detached garage, workshop, or garden studio
- Elderly parents' bedroom as a simple call button
- Home offices and salons where the front door is out of earshot
- Rentals, because nothing needs to be wired or drilled
Specifications
- RangeUp to 1,300 ft / 400 m, open line of sight
- SignalFM, one-to-one pairing
- Melodies58
- Volume levels5, adjustable
- Weather ratingIP55 dust and water resistant
- Operating temperature-4°F to 140°F / -20°C to 60°C
- HousingFlame-resistant ABS
- Button powerBattery, 1–3 year typical life
- Receiver powerPlug-in, no batteries
- PairingDone at the factory
Questions people ask
-
Do I have to pair it myself?
No. Everything in the kit is paired before it leaves the factory. Plug in the receiver and press the button to check it.
-
Will it be triggered by my neighbour's doorbell?
One-to-one FM pairing means your button only rings your receiver.
-
Can it live outdoors all year?
The button is rated IP55 and works from -4°F to 140°F. The receiver is an indoor plug-in unit.
-
Can I add more receivers later?
Yes. Additional receivers can be added so several rooms ring at once.
-
Does it need Wi-Fi or an app?
No. It works entirely on its own radio signal, so an internet outage does not affect it.
If anything goes wrong. Units are assembled on automated placement equipment and checked before packing. If a button or receiver ever stops responding, reach out to us and we will help you sort it out.
Range figures are measured in open, obstacle-free conditions. Walls, metal, and other electronics will reduce effective range. Battery life varies with usage and temperature.
Wireless Doorbell — Pre-Paired, No Wi-Fi, 1,300 ft Range
We offer FREE shipping on all orders within the US. Orders are typically processed within 1-2 business days. If you are not completely satisfied with your purchase, you can return it within 30 days of delivery for a full refund or exchange.
Paired at the factory · No wiring
Hear every visitor, anywhere in the house
A wireless doorbell that is ready the moment you unpack it. Plug the receiver into any outlet, stick the button by the door, and you are done in about a minute. No wiring, no electrician, no app.
- 1 minSetup time
- 1,300 ftOpen-air range
- 58Melodies
- IP55Weather resistant
01 — Out of the box
Already paired before it ships
The button and receiver arrive matched to each other, so there is nothing to configure. Plug the receiver in, mount the button with the included adhesive or screws, and press it once to confirm.
- No wiring and no electrician needed
- No hub, Wi-Fi, or phone setup
- Adhesive mounting keeps rented doorframes intact
02 — Coverage
Reaches the back bedroom and the garage
An FM signal with one-to-one pairing gives it strong resistance to interference, so your chime will not be set off by a neighbour's doorbell. Range reaches up to 1,300 ft in open line-of-sight conditions. Walls, metal doors, and floors shorten that, which is why extra receivers help in larger homes.
Real-world range depends on how many walls the signal has to pass through.
03 — Sound
58 melodies, 5 volume levels
Pick a short ping for daytime deliveries or a longer tune you will hear over a running tap. Five volume steps let you set it loud for the workshop and quiet for a nursery.
- Short chimes and longer melodies, 58 in total
- Volume adjusts on the receiver, no tools needed
- Give the front and back door different tunes so you know where to go
04 — Build
Built for the outside of the door
The button is moulded from flame-resistant ABS and carries IP55 protection against dust and water spray, with an operating range of -4°F to 140°F (-20°C to 60°C). It handles rain, snow, and summer sun on an exposed porch.
05 — Power
Years between battery changes
The button draws no power until someone presses it, so a single battery typically lasts 1 to 3 years depending on how often it is used. The receiver runs from the wall outlet on an optimised low-draw circuit, so there are no batteries to track indoors.
06 — Fits your layout
Add buttons and receivers as you need them
Every receiver in a kit rings together, so you can cover a whole floor plan. Choose the combination that matches your home.
-
1 button + 1 receiver
Apartments and small flats where one chime carries.
-
1 button + 2 receivers
One entrance, two floors. Put one upstairs and one in the kitchen.
-
2 buttons + 3 receivers
Front and back door, with chimes in the main rooms and the garage.
Where people put it
- Front and back doors of a two-storey home
- Detached garage, workshop, or garden studio
- Elderly parents' bedroom as a simple call button
- Home offices and salons where the front door is out of earshot
- Rentals, because nothing needs to be wired or drilled
Specifications
- RangeUp to 1,300 ft / 400 m, open line of sight
- SignalFM, one-to-one pairing
- Melodies58
- Volume levels5, adjustable
- Weather ratingIP55 dust and water resistant
- Operating temperature-4°F to 140°F / -20°C to 60°C
- HousingFlame-resistant ABS
- Button powerBattery, 1–3 year typical life
- Receiver powerPlug-in, no batteries
- PairingDone at the factory
Questions people ask
-
Do I have to pair it myself?
No. Everything in the kit is paired before it leaves the factory. Plug in the receiver and press the button to check it.
-
Will it be triggered by my neighbour's doorbell?
One-to-one FM pairing means your button only rings your receiver.
-
Can it live outdoors all year?
The button is rated IP55 and works from -4°F to 140°F. The receiver is an indoor plug-in unit.
-
Can I add more receivers later?
Yes. Additional receivers can be added so several rooms ring at once.
-
Does it need Wi-Fi or an app?
No. It works entirely on its own radio signal, so an internet outage does not affect it.
If anything goes wrong. Units are assembled on automated placement equipment and checked before packing. If a button or receiver ever stops responding, reach out to us and we will help you sort it out.
Range figures are measured in open, obstacle-free conditions. Walls, metal, and other electronics will reduce effective range. Battery life varies with usage and temperature.
Wireless Doorbell — Pre-Paired, No Wi-Fi, 1,300 ft Range
$27.88